- 积分
- 10287
注册时间2004-8-8
参与分
技术分
精华
TA的每日心情 | 开心 2020-4-6 13:39 |
---|
签到天数: 5 天 [LV.2]偶尔看看I
|
这几个测试都很老了。我之前看过。
第一个测试,是ats34的,In regards to strength, because of the steel (high carbon, high alloy stainless), high hardness, and thick large cross section, the WB is quite strong. It easily held 200 lbs on the handle without excessive flex and took an applied load of about 290 +/- 10 lbs to break the tip. With the force applied about 10" from the point at which the blade was in the angled join, and assuming the force was perpendicular to the handle ( the blade was wrapped to protect against shards), this gives a break torque of 2750 +/- 250 in.lbs. This is high。
我觉得表现算不错。
后两个测试是s30v的钢材。s30v一向被认为韧性不足,保持性较好而已,一点也不意外。而且!目前所有刀厂的s30v的刀均普遍表现如此。并非strider刀厂如何。
如果光看测试,不能分析测试,简单看结果,甚至不去分析结果产生的原因,测试意义就不大了。
顺便,想问下,有没有BG42的strider的暴力测试,有对比的更好。
[ 本帖最后由 realjam 于 2008-10-15 21:45 编辑 ] |
|