想搞个微型砂带机，懂行的朋友麻烦给点建议

HUBO

打理一下爱刀，又懒，就去看了一下微型砂带机。砂带机不贵，运费却可以买两个了。呵呵

http://www.amazon.com/Work-Sharp-WSSA0002780-Sharpening-System/dp/B003Z7O62I/ref=pd_sim_hi_10

• Sharpens kitchen knives, hunting knives and pocket knives quickly and easily
• Sharpens scissors and serrated blades
• Only works with the Work Sharp 3000 model. Not for use on other Work Sharp tools or accessories.
• Remove sharpening guide for freehand sharpening and honing of cutting tools, marking knives and carving tools
• Fully adjustable sharpening guide: 10°- 35°
• From the ManufacturerThe Work Sharp 3000 Belt Sharpening System attachment sharpens knives & tools using a combination of flexible abrasive belts and a precision sharpening guide. This creates the sharpest blades you've ever had with speed, ease and repeatability. The sharpening guide is adjustable from 10° to 35° and accommodates kitchen knives, outdoor knives (hunting knives, pocket knives, filet knives, etc.) as well as scissors and serrated knives. This sharpening system can also be used without the sharpening guide for a wide array of freehand sharpening and honing tasks on many woodworking cutting tools such as marking knives and carving tools. Kit includes (1) P120 Coarse belt, (1) P220 Medium Grit Belt and (1) 6000 Grit Honing Belt - 3 total belts. Belts are 1" x 18" and do not fit other Work Sharp tools or accessories. These premium grade abrasives from Norton and Micro-Mesh are long lasting and designed for sharpening and honing applications. This tool is assembled and quality tested in Ashland Oregon and includes a detailed User's Guide.
  
  Product DescriptionYou can monitor stock removal from above with the Work Sharps "see-through" wheel while a large port provides access from underneath. This works exceptionally well for sharpening large turning tools quickly and efficiently while also providing a means to sharpen and hone carving tools, especially the smaller profiles that require a more delicate touch. This will be the difference between sharpening and ruining a valued tool.Air cooled, dry sharpening system that uses maintenance free 150mm tempered glass wheels to which you adhere PSA abrasives. Slotted "see-through" wheel for fast and precise sharpening of carving and lathe tools. Precise and repeatable sharpening port enables sharpening of 20, 25, 30, and 35 degree angle chisels and plane irons up to 2" wide. No jigs needed; just select angle and sharpen. Lapping abrasive in sharpening port increases burr removal and speeds sharpeningRigid bevel angle settings and Skew Cam provide precise positioning of the Sharpening Port. Bevel and skew geometry are not affected by wheel diameter, chisel size, or complex user setup.Forced air-cooling and the sharpening port heat sink allow for higher material removal rates without affecting the steel temper Allows for quick reshaping of a new or damaged chisel, and fast honing of a micro bevel. Precise bevel angles are set in the Sharpening Port, not in a fixture or jig, so switching between angles is simple and fast. No re-calibration required for changing wheel diameter or tool size. Coarse grind for rapid shaping and then micro-fine hone in one port. The Work Sharp 3000 comes with a 2 year manufacturers warranty and the following accessories: 2 tempered float glass wheels, a "see-through" slotted wheel, top tool rest, crepe stick, and PSA abrasive kit. 110V, 1/5 hp motor, 580 rpm (gear reduced), 16 lbs.
  

gsh168

不错！

gsh168

不错！

Thinkk

这个完全有能力自己DIY，结构简单了点。功能也打折扣。
你看清楚尺寸在做决定把。 在Youtube 上我看过更简易的，但性能恐怕比这个好。
http://www.youku.com/playlist_show/id_15444356.html
欢迎围观，部分我从国外搬运进来的。

HUBO

还是KMG的棒啊，不知道KMG的砂带机在美国多少刀

菩萨蛮

好东西  多少米啊

wanzisusu

东西布偶，不知价格几何。

喇嘛

LZ费心组织个团购吧。

呀呀呀

好东西，不知哪里有卖

辰墨

价格多少啊？