新到手的kershaw 1670 S30V

i42 · 发表于 2011-12-19 11:01

周末新到手一把Kershaw
Kershaw Blur Knife with S30V Steel Blade

手感真好,快开给力不多说了,上图

林波微步 · 发表于 2011-12-19 12:14

快开在哪里？？？

lchen001 · 发表于 2011-12-19 12:17

帝都的吧？

ry13517291173 · 发表于 2011-12-19 12:50

2# 林波微步

介个是助力~~~
你要先给点力~~~~

i42 · 发表于 2011-12-19 13:13

俺秀豆了大家别笑话 {:4_114:}

i42 · 发表于 2011-12-19 13:16

开刀时,刀片与刀身夹角到20°左右的时候,刀片就会全部弹开锁定

dcyhaitao · 发表于 2011-12-19 13:34

哥们，把你的头像换一下吧，我看了眼晕
这个逗号好像是09年春天我拍摄的，呵呵，喜欢的话我可以传给你原图

i42 · 发表于 2011-12-19 13:37

哈哈缘分啊

我就是太喜欢你的图片了,本来是在群里别人贴的,他说也不知道谁的我就用了哈哈

i42 · 发表于 2011-12-19 13:38

kershaw 的SpeedSafe system的说明

The patented SpeedSafe knife-opening system helps users open the knife by applying manual pressure to the thumb stud or blade protrusion. The heart of the SpeedSafe system--which is built into many of Kershaw's best-selling knives--is its torsion bar, which keeps gravity from opening the knife. After the blade is out of the handle, the torsion bar moves along its half-moon track and takes over, smoothly opening the blade and locking it into position, ready for use. Although they may look similar at first glance, SpeedSafe knives are not considered switchblades. Unlike a switchblade, SpeedSafe knives do not deploy with the push of a button in the handle or by gravity alone. Instead, the user must manually overcome the torsion bar's resistance, putting the knives outside the federal definition of a switchblade. However, it's the responsibility of the buyer to investigate and comply with the laws and regulations that apply in his or her specific area. Buyers should rest assured, however, that SpeedSafe knives are extremely safe, as they open only when the user manually deploys them, and lock securely into position when open so they don't close accidentally

喜欢volvo · 发表于 2011-12-19 13:51

看着挺好的～～～～

真真同学 · 发表于 2011-12-19 15:43

一直想买着型号的大马版本

刀刀爱 · 发表于 2011-12-19 15:45

切削肯定很好

pyh4561 · 发表于 2011-12-22 09:49

水滴头的我都喜欢。。

iam_jianghf · 发表于 2011-12-22 10:00

S30V 的我也很喜欢，14C28N的更是便宜实用，我有只复合刃的。

张大瘸 · 发表于 2011-12-27 17:45

S刃的无爱。。。。自己磨起来太麻烦啊。。

右撇子 · 发表于 2011-12-27 22:58

刀型很好看，是Kershaw折刀里面我最喜欢的一把

sohoqh · 发表于 2011-12-28 10:24

不太喜欢水滴头的，不过的确是把好刀{:4_97:}

鹏哥。 · 发表于 2011-12-31 04:31

以前两把S刃让我磨报废了。。
从此免疫。

i42 · 发表于 2012-5-28 11:18

用204磨非常好磨

每边20下，剃毛无压力

[量产刀] 新到手的kershaw 1670 S30V