国外论坛对MORA511的评价

47176713

曾经见过有电网工人佩戴这款小刀MORA511 没想到今天到国外刀坛闲逛又看到了它的身影，里面关于这款刀的评价有很多 俺就挑选并翻译了两个外国佬的评价跟大家伙分享下，中话下次团MORA增加几个款式倒也好~~~~
原文：Well lets start with the pros and cons.:

Pros: Cheap, Durable, Grippy, Fingergard, Sharp, Tough.

Cons: Rat Tang, Thin, Sheath, Fingergard

So how does this knife compare to other hight dollar knives, it is wonderful that is how it compares. This little knife is a work horse it will do almost anything you want it to. Now will it break if you use it for lots of battoning of wood, probably but its not made for that, this is not a full tang survival knife. What this is, is a great starter and backup knife. I got this knife for 8 dollars with two dollars for shipping, and after taxes it came out to about 10.50 US. Now for the money I don’t think you can beat this knife. It will cut anything and it came sharper than some razors I have had. It sharpens easily and holds and edge for a while. The one I have is carbon steel and I don’t know if this one comes in a stainless model. One minor problem I have is the rounded spine of the knife. It is difficult to strike a flint on it the way it comes from the factory but this is easily remedied with a file just a little elbow work puts a nice 90 degree spine on it that will throw sparks.



As far as I'm concerned It's a knife, that is designed, for being used as a cutting/slicing implement. It's not a pry bar or a wedge. It sports great steel that will take and hold a downright scary edge, and is quite easy to sharpen in the field, with it's scandi grind. For the money, I have a real hard time trying to nitpick at it. I really doubt you're going to break that thing, doing task that are required of a small, belt knife, with a thinner blade grind. I hate the belt loop on some Mora Sheaths though. I much prefer the other style, with the clip. These "cheap plastic knives" will work great if you use them for their intended purpose. I like my Moras a great deal, and paired with a good folding saw or axe, would feel very prepared in the woods. It's a knife that is best used as a part of a kit IMHO.


译文：
评价一下它的优缺点吧！
优点：便宜耐用，锋利，兼有护指。
缺点：轻薄，非一体龙骨，刀鞘和刀柄也存在不足。
这款刀如何和其他的高价刀相比呢？这是个很有意思的问题。这款刀就如同一匹吃苦耐劳的耕马能帮助你完成任何想要做的事情，假如你用它来狂砍木头它会挂掉的，因为其本不是为此而生的，因为它并不是一把全龙骨刀。那么它是什么呢？其实它既是一把主力刀同时又可以用作备用刀，8美元外加2美元的邮寄费用，税后到手后我仅仅支付了10.5美元。就它的价格来说我想大家不会有任何异议吧。它可以切削任何东西，锋利度可以与我曾拥有的的剃刀相媲美。很容易打磨，只需一会功夫就能锋利如初。我手里这只是碳钢版的，我不知道同款中是否还有不锈钢版的。我所遇到的一个小问题就是它的刀背是半球形的，这使得很难利用刀背配合打火石取火，这应该是出厂原因导致的，不过这个问题也很好解决，只要拿起锉刀不消一会功夫就能在刀背上挫出一个漂亮的九十度，接下来便可以利用它打火了！



在我看来，这是一把被设计用来切割的工具。它并不是撬棍和楔子。其由高品质的钢材制作且拥有锋利的刀刃——斯堪的纳维亚开锋（其实是极幼开锋），在野外也很容易被打磨锋利。就价格来说，我对它还是比较挑剔的，可能大家不同意思我的观点，那就是难道工作的时候需要一把必须穿腰带才能用的小刀吗？我很不喜欢一些MORA刀鞘上的那些腰带穿孔。我更喜欢那些拥有腰带夹的款式。如果你按照它们原本的设计用途来使用这些“便宜的塑料刀”，它们会工作得很出色。我非常喜欢我的mora刀，搭配上一把上好的折叠锯或者斧头，会让人在丛林中感到有备无患。恕我直言，它确实是一只优秀的刀具！

鹰翱九天

第一个回帖，感谢分享！，不错的刀

sdz神钓者

第二个回的，一直在关注mora。

真的好想你

第三个回帖，这个裤子是不是太肥大了

江汉关

第四个回帖，他的龙骨是怎么样的？

47176713

5# 江汉关
非全龙骨结构

47176713

4# 真的好想你
考虑到护指的收纳问题 没办法~~

railjt

一直在关注mora