Custom Hinderer XM18 and XM24 定制的折叠刀

DanHuang

我只是想我会分享一些照片为那些有兴趣。

3rd Gen Rick Hinderer XM18 3.5" Spanto Non-Flipper
3.5" Custom Hand Hollow Ground Spanto
Hinderer Smooth Carbon Fiber G10 Scale
Bead-blasted Titanium Lock-side, Liner, Standoffs, Filler Tab & Clip
Satin Blade CTS-40CP Steel Etched on the blade

DanHuang

这里是更难的一个。

4th Gen Rick Hinderer XM18 3.5" Skinner Flipper, Anodized Titanium
3.5" Custom Skinner Flipper
Hinderer Smooth Carbon Fiber G10 Scale
Blue Anodized Stonewashed Titanium Lock-side, Liner, Standoffs, Filler Tab & Clip
Sterile 4th Generation Satin Blade S35VN Steel

DanHuang

这里是较大的一个。

Custom Rick Hinderer XM24 Spanto Non-Flipper, S35VN Black G10
4" Blade Length
9.125" Overall Length
5.625" Closed Length
.185" Blade Thickness
7.8oz Weight
Hand Finished Satin S35VN
Hollow Ground Spanto
Black G10 Scale
Bead-Blasted Titanium Frame-lock Finish

iam_jianghf

That skinner is beautiful, I bet it's not cheap...

定制版的拉丝确实比量产的石洗漂亮。

Falling_Rain

感谢分享。Rick H 的刀头形状真复杂。那个Reverse Tanto 切割性能应该很好吧？

DanHuang

iam_jianghf 发表于 2013-12-7 12:58
That skinner is beautiful, I bet it's not cheap...

定制版的拉丝确实比量产的石洗漂亮。

是啊，他们是相当昂贵的。我拿起这件事对我的一个朋友。

RickyBOS

第一把锁定接触面是一条曲线

色字头上一把刀

DanHuang 发表于 2013-12-8 06:34
是啊，他们是相当昂贵的。我拿起这件事对我的一个朋友。

I cann't understand your chinese, I think you speak in english is better  for us....
原来有这样一个限制：内容中的中文太少！难怪！

色字头上一把刀

hinderer的custom手工刀非常值得玩，可惜价格太昂贵
那把 Skinner 非常难得，很是喜欢，谢谢LZ

闪烁猪

楼主的收藏真的是精彩的不得了 定制xm 我非常喜欢 感谢分享

DanHuang

有很多这样的习俗也花费了很多钱，但并不像其他定制机。

I was there at the Hinderer Ranch one summer when he ground one of the skinner XM18 in front of a crowd and we got to watch.  He told us that there is no set way he does the skinners and sometimes they come out differently so no to skinners are alike and some come out looking completely different.  

I really thought that getting the XM24 was hard, he has not made any of those in a long time and are really hard to come by.  I don't think I have seen one up for lottery in the last two years.  And at the last show which was the New York Custom Knife show, he didn't bring any custom folders, so they may be getting really hard to get.

尖端技术

这图真叫人赏心悦目，话说没快开感觉有点不习惯

DanHuang

因此，对于那些不知道，这里有图片，以显示自定义和制作切片机的区别

色字头上一把刀

HINDERER手工custom才值得玩,量产的已经供大于求了（价格脱离实际价值太多，泡沫）

andy

真的好棒棒也。

DanHuang

色字头上一把刀 发表于 2013-12-8 22:56
HINDERER手工custom才值得玩,量产的已经供大于求了（价格脱离实际价值太多，泡沫）

是的，我同意你的看法。
Hinderer had purchased more CNC machines.  I think if they started to discontinue certain models, it would help bring the prices back up.  Hinderer did announce that they will be making a new folder for the beginning of next year.  I think it's about time.  They have been selling pretty much the same model for over three years now...

色字头上一把刀

DanHuang 发表于 2013-12-9 12:00
是的，我同意你的看法。
Hinderer had purchased more CNC machines.  I think if they started to disc ...

量产太多了，炒家和粉丝们接不了那么多了，崩盘了

DanHuang

色字头上一把刀 发表于 2013-12-8 23:04
量产太多了，炒家和粉丝们接不了那么多了，崩盘了

刀本身就是一个巨大的刀。
But the economy is bad here in the US and many people that were buying for investment are all trying to sell them because they need the money more than a knife, and there are too many avil for sale while Hinderer is making more and more.  

scylla

DanHuang 发表于 2013-12-9 12:00
是的，我同意你的看法。
Hinderer had purchased more CNC machines.  I think if they started to disc ...

Hello Mr DanHuang
    感谢您关于Rick Hinderer折刀的图片分享,这是我最喜欢的折刀之一!
    并且请教您,是否有关于Hinderer明年新折刀作品的外形图片?

色字头上一把刀

DanHuang 发表于 2013-12-8 00:53
这里是较大的一个。

Custom Rick Hinderer XM24 Spanto Non-Flipper, S35VN Black G10

你是喜欢non-flipper有意买的吗？看到你有两把都是。
我更喜欢flipper,这种开刀方式以后估计会很长一段时期都会被使用并且是主流